WA distributor for Oilpath Hydraulics & Baker Hydraulics

39 Sorbonne Cresent
Canning Vale
Western Australia 6155

phone +61 8 9455 2344
fax +61 8 9455 2045
Email us

  • baker hydraulics
  • oilpath hydraulics
  • ryco hydraulics

Hydraulic Cylinders

Stocking a comprehensive range of ASAE agricultural cylinders in our Canning Vale facility, combined with the design and manufacturing ability of South Australian company Baker Hydraulics Pty Ltd and the support of in-house and local specialist engineering companies, we at Gerrard Hydraulics can offer a solution to almost any linear actuator application that may require the power of a 10 inch cylinder, a general agricultural ram or the finesse of a small bore servo cylinder.


click to enlarge

APEX 2 AGRICULTURAL CYLINDERS

General purpose agricultural cylinders are available off the shelf in:
2-1/2 inch bore with standard strokes of 6, 8, 12, 16, 18, 20, 24, 30, 36 and 48 inch.
3 inch bore with standard strokes of 6, 8, 12, 16, 18, 20 24 30 and 36 inch.
3-1/2 and 4 inch bore with standard strokes of 8, 12, 16, 18, 24, 30 and 36 inch.

Non standard strokes can be made to order
Maximum working pressures of 3000 PSI (207 bar) depending on stroke and application.

For 5 inch bores see SUPER AG section


click to enlarge

SUPER AG AGRICULTURAL CYLINDERS

Heavy duty agricultural cylinders are available off the shelf in:
5 inch bore with standard strokes of 8, 12, 16, 18, and 24 inch.

Non standard strokes and bores can be made to order

Maximum working pressures of 3000 PSI (207 bar) depending on stroke and application.


click to enlarge

PHASING CYLINDERS

Heavy duty agricultural Phasing cylinders are available off the shelf in:
3 to 5 inch bore in 1/4 inch increments with standard strokes of 8 and 12 inch.

Non standard strokes can be made to order

Maximum working pressures of 3000 PSI (207 bar) depending on stroke and application.


click to enlarge

AGRICULTURAL TOP-LINK CYLINDERS

Based on the proven Apex 2 design Top-link agricultural cylinders are available off the shelf in:
2-1/2 inch bore with standard strokes of 8 and 12 inch.

Non standard strokes can be made to order
Maximum working pressures of 3000 PSI (207 bar) depending on stroke and application.


click to enlarge

FRONT END LOADER CYLINDERS

A range of standard loader cylinders are available in 2-1/2 and 3 inch bores with standard strokes of 16, 22-1/4, 27-5/8 and 30 inch.

Maximum working pressures of 2000 PSI (140 bar) depending on stroke and application

  • FEL - (1.21MB)

click to enlarge

TELESCOPIC DISPLACEMENT CYLINDER

Suitable for tipping trailers and car transporters, this versatile cylinder is 2 stage 73mm and 50mm with a total stroke of 58-3/4 inches.

Non standard strokes can be made to order

Maximum working pressures of 2000 PSI (140 bar) depending on application


click to enlarge

LIGHT INDUSTRIAL CYLINDERS

General purpose light industrial cylinders are available off the shelf in:
1-1/2 and 2 inch bore with standard strokes of 6, 8, 10 and 12 inch.

Non standard strokes can be made to order
Maximum working pressures of 2500 PSI (175 bar) depending on stroke and application.


click to enlarge

HEAVY DUTY INDUSTRIAL CYLINDERS

Heavy duty industrial cylinders are made to order, allowing your solutions to be tailor made with all the options and configurations packaged exactly as your requirements demand.

With standard bores from 1-1/2 to 6 inch and strokes almost as long as you can imagine, all styles of mountings can be catered for, with in built valves and many other options.

Maximum working pressures of 3000 PSI (207 bar) depending on stroke and application.

Larger bores and higher pressures are available upon request.