call us +61 8 9455 2344

OP10 directional control valve

Double acting, single acting and motor spools can be used in any combination up to 4 spools. Standard actuation is by a lever and options of cable and air operation can be offered. Electric start switches can be fitted to each spool to allow remote operations of DC voltage power units. The valves can be set up as open centre, closed centre and power beyond configurations, with and without relief valves to the inlet port. The option of 2 and 3 position detent, spring centred and spring centred with detent in one position are available.

Flow capacity Up to 45 lpm (10 IMPgpm)
Pressure range Up to 350 bar (5000 psi)

• OP10 Data Sheet - (1.09MB)
• OP10 Cable Control - (200kb)
• OP10_electric_start_kit - (212kb)

OP20 Directional Control Valve

Double acting, single acting and motor spools can be used in any combination up to 5 spools. Standard actuation is by a lever and options of cable, air and air/electric or a combination of these can be offered. The valves can be set up as open centre, closed centre and power beyond configurations, with and without relief valves to the inlet port. The option of 2 and 3 position detent, spring centred and spring centred with detent in one position are available.

Flow capacity (7/8 ports) Up to 90 lpm (20 IMPgpm)
Flow capacity (1-1/16 ports) Up to 120 lpm (26 IMPgpm)
Pressure range Up to 210 bar (3000 psi)

• OP20 Data Sheet - (1.05MB)
• OP20 Cable Control - (200kb)
• OP20 Lever Kit B - (184kb)

OP27 3 port selector valve

OP27 3 port selector valves are available in 1/2, 3/4 and 1 inch BSPT ports. Standard actuation is by push/pull knob and options of lever, cable, air or a combination of these can be offered.

Flow capacity Up to 90 lpm (20 IMPgpm)
Pressure range Up to 210 bar (3000 psi)

• OP27 Data Sheets - (484 kb)

Nimco SVB 6 port solenoid operated selector valve

Nimco SVB 6 port selector valves are available in 1/2 BSPT ports. Standard actuation is by solenoid in 12 or 24 VDC. These valves may be stacked side by side with optional mounting kits to have up to 3 sections to give 4 double acting actions.

Flow capacity Up to 90 lpm (23.8 usgpm)
Pressure range Up to 280 bar (4060 psi)

• Nimco SVB Data Sheet - (4.44MB)

OP80 6 port selector valve

OP80 6 port selector valves are available in 1/2 and 3/4 inch BSPT ports. Standard actuation is by push/pull knob and options of lever, cable, air or a combination of these can be offered.

Flow capacity Up to 90 lpm (20 IMPgpm)
Pressure range Up to 210 bar (3000 psi)

• OP80 Data Sheets - (452kb)

OP101 Double pilot operated check valve

Oilpath pilot operated check valves (also know as lock valves) are an economical and versatile option to your load holding solution. Available in 1/2 BSPT ports with options of direct to cylinder mounting via 3/4 JICM nipples and steel tube.

Flow capacity Up to 54 lpm (12 IMPgpm)
Pressure range Up to 207 bar (3000 psi)

• OP101 Data Sheets - (484 kb)

OP3 Solenoid and Air operated directional control valves

OP3 Solenoid operated valves are offered in CETOP3 interface with 2/4 and 3/4 position and port configurations. Many spool configurations and options are available.
Actuation is available in 12 and 24 VDC, 115 and 240 VAC and also available in pneumatic actuation.
A full range of sub-plates, series and parallel connection manifolds and gasket mounted accessory valves are available
Flow capacity Up to 80 lpm (21 USgpm) Depending on spool style and application

Pressure range Up to 350 bar (5000 psi)
Mounting interface CETOP3

CETOP5, CETOP 7 and CETOP 8 are available in other brands.

• OP3 Data Sheets - (1.22MB)
• Parallel Manifold Data Sheet - (440kb)
• Manifold Relief Module - (296kb)
• Side Entry Subplate - (276kb)
• Bottom Entry Subplate - (280kb)